/ Sirens / Enforcer Sirens
  • ES6200-IQ siren uses microprocessor based technology to provide a compact electronic siren system for use in emergency vehicles
  • Ideal choice for undercover applications-small compact control head and 18' long harness provide the installation flexibility for such applications
  • Siren Mode - two available siren tones: Wail and Yelp
  • Siren tones can be selected using the toggle switch from the remote controller
    - switch UP for Wail tone
    - switch DOWN for Yelp tone
  • Manual Mode - Air Horn
    It is momentary mode activated by holding down the Air Horn switch on the siren's remote controller
    Note: Manual mode will override the Siren mode
    For Installation Manuals go Literature/Download Tab
  • Input Voltage: 11-16 Volts DC
  • Input Fuse: 20 Amp (External)
  • Power circuit built-in protection: Short circuit and reversed polarity
  • Operating Temperature Ranges: -30C to +65C
  • Standby Current: 50mA +10% during Ignition input OFF time-out
                                  0mA after time-out
  • Operating Current: 10 Amps
  • Frequency Range: 700 to 1640 Hz (nominal)
  • Cycle Rate:
    Wail:20 cycles/min
    Yelp: 200 cycles/min
    Nominal Voltage Output: 52V p-p (11? load)
    Audio Frequency Response: 100-4000 Hz 3dB
    Audio Distortion: 10% or less
  • Audio Power: 32watt
  • Amplifier Output Impedance: 11 Ohms